Flexoplate

Flexoplate

Flexoplate – AniCAM with Flexoplate QC

Having optimum control of your flexo plates and sleeves will save you time, waste and money.

The AniCAM with Flexoplate QC provides two readings methods: 2 dimensional readings with an automatic reflective or translucent dot detection and a 3 dimensional analysis which provides additional information on dot shape, height and relief depths.

The time and cost of defective plates will increase waste reduce productivity and profitability.  Cost savings made over time through quality control on dot shape, relief, depth and dot sizes can be significantly high and will result in a fast return of investment.

Download a Brochure

Flexoplate


Download

Having used the AniCAM for the past 6 months, we saw a saving of
29 hours per month in make-ready setup time
Troika Systems Ltd hold honours for technical innovations in the flexographic printing industry
During the past 12 months we made a click here saving of 15% in make-ready waste
Troika Systems Ltd hold honours for technical innovations in the flexographic printing industry
During the past 2 years we have seen a saving in make-ready waste in excess of £210,000
Troika Systems Ltd hold honours for technical innovations in the flexographic printing industry
We saw a reduction of 55% in ink waste
Troika Systems Ltd hold honours for technical innovations in the flexographic printing industry
Previous
Next

We'll contact you