AniCAM MagneCAM Option

Positioning an AniCAM or SurfaceCAM on steel cylinders/rolls rotated at any angle incorporating magnetic legs and special internal drive couplings.



1.) To address the needs of the Corrugated Printing Market, Anilox QC systems with the MagneCAM option can be supplied with the AMS 75 Anilox Management system (supporting up to 75 Anilox rolls).

2.) The cylinder/roll diameter is limited to a minimum of 100mm for units fitted with the MagneCAM option.

3.)The Y-axis microadjuster cannot be fitted with the MagneCAM option.

AniCAM MagneCAM Option